Quick answer: Spalling concrete is when the concrete on your ceiling cracks, bulges or falls off because the steel bars inside have started to rust. In Singapore it shows up most often in toilet and kitchen ceilings. HDB advises not to delay repairs, because the affected area becomes larger over time. A small patch can be repaired by the owner, but a larger area should be handled by a contractor before more concrete falls.
What is spalling concrete?
Concrete ceilings have steel bars inside them for strength. According to HDB’s home care guide, spalling is largely caused by carbonation, a natural deterioration process. Over time the steel bars rust. Rust takes up more space than steel, so it pushes the concrete outwards. The concrete then cracks, bulges and eventually breaks off.
Damp areas like toilets and kitchens are more prone to it because of the humidity.
Signs of spalling concrete to look out for
Look up at your toilet, kitchen and bedroom ceilings. Warning signs include:
- Cracks in the ceiling, especially straight-line cracks.
- Bulging or swollen patches in the ceiling surface.
- Paint that is bubbling, flaking or peeling.
- Brown rust stains coming through the paint.
- Small bits of concrete or paint on the floor below.
- Holes where concrete has already dropped off.
If you see exposed, rusty steel bars, the spalling is already well advanced.
Why you shouldn’t wait
Spalling doesn’t fix itself. As the steel keeps rusting, more concrete loosens. In Singapore, there have been news reports of residents being hurt when pieces of spalled concrete fell from toilet ceilings. If you notice loose or hanging pieces, keep people away from that area until it’s dealt with.
Can I repair spalling concrete myself?
HDB’s guide says owners can repair small areas themselves. The general steps are:
- Remove the loose, spalled concrete.
- Clean the exposed steel bars and remove the rust.
- Coat the steel bars with anti-rust paint.
- Apply a bonding agent.
- Patch with a suitable repair mortar.
- Repaint the area to match the ceiling.
For a large area, HDB advises engaging a contractor. A bigger repair involves working overhead with heavy material, and the steel bars need proper treatment. If only the surface is patched, the rust underneath can keep spreading.
What does a proper spalling repair involve?
A typical contractor repair follows the same principle on a larger scale:
- Protecting the floor and nearby fittings.
- Hacking off the loose and weakened concrete.
- Cleaning and treating the exposed steel bars against rust.
- Rebuilding the ceiling with repair mortar.
- Plastering, smoothing and repainting the ceiling.
The exact scope depends on the size of the affected area, how much the steel has rusted and what’s in the way, such as ceiling boards, lights or exhaust fans. That’s why photos of the full ceiling, not just the crack, are important.
Does HDB help with spalling concrete repairs?
Flat owners are responsible for maintaining the inside of their flats, including spalling concrete. However, HDB offers help under its Goodwill Repair Assistance (GRA) scheme. In written answers to Parliament, the Ministry of National Development has said that under GRA, HDB helps arrange the repair works and co-pays 50% of the cost. Owners can also choose to engage their own contractor if they want the work done earlier.
Eligibility and arrangements can change, so check with your HDB branch for your flat’s current situation before deciding.
How to help prevent spalling concrete
HDB’s guide suggests:
- Repaint ceilings regularly. Paint helps protect the concrete. Repaint when the ceiling paint looks worn. See our painting and repainting service.
- Seal cracks and holes promptly. This includes old drill holes from removed fittings.
- Ventilate wet areas. Open the toilet window or door, or run the exhaust fan, after showering.
If a ceiling leak from the unit above is keeping the concrete wet, that leak needs attention too. Learn more about our waterproofing work.
What to send us for an assessment
WhatsApp us:
- A full photo of the ceiling, showing the whole room.
- Close-ups of the cracks, bulges or exposed steel.
- Which room it is in, such as the toilet, kitchen or bedroom.
- Whether there’s any water leak or wet patch.
- Your location and whether it’s an HDB flat, condo or landed home.
We’ll look at the photos and advise whether a site visit is needed. Find out more about our spalling concrete repair service.
Watch our repair work
See real repair and reinstatement projects on the 9RENO YouTube channel.
Frequently asked questions
What causes spalling concrete in HDB flats?
It’s mainly caused by carbonation, a natural ageing process that lets the steel bars inside the concrete rust. The rust expands and pushes the concrete off. Damp areas like toilets and kitchens are more affected.
Is spalling concrete dangerous?
It can be. Loose concrete can fall from the ceiling. If you see bulging or hanging pieces, keep people away from the area and arrange a repair promptly.
Can I just paint over the cracks?
No. Painting over the cracks hides the sign but doesn’t stop the steel from rusting. The loose concrete needs to be removed and the steel treated before patching and repainting.
Who pays for spalling concrete repair in an HDB flat?
The flat owner is responsible. HDB’s Goodwill Repair Assistance scheme can co-pay part of the cost for eligible cases. Check with your HDB branch for current details.
How do I know if the spalling area is too big to repair myself?
HDB suggests owners repair only small areas. If the crack runs across a large part of the ceiling, the concrete is bulging over a wide area or steel bars are exposed in several places, engage a contractor.
Seen cracks or bulges on your ceiling?
WhatsApp 9RENO at +65 9858 3011 with a full photo of the ceiling, close-ups of the damage, your location and a short description. We’ll assess your enquiry and advise the next step.

Leave a Reply